A thorn in the side of any and every workplace is mold. Mold is a very dangerous form of fungus that can get into our lungs and cause all kinds of nasty ailments such as asthma, colds, fatigue, bleeding in the lungs, rashes, uncontrollable coughing, and even chronic dandruff. Employers, as well as employees should take precautions to make sure that mold has not infected their work environment. It is also important to make sure that employers and employees immediately report if they experience any of the aforementioned symptoms. If so, professional help may need to be called in to clean out the mold and prevent further infestation.
If a mold inspector is called in and he or she does find mold, it is important that you inform your employees of the mold, and that the problem is indeed being taken care of. It is also important that you inform them of the measures that will be taken during the removal of the unwanted guest. The United States Occupational Safety and Health Administration (OSHA) strongly recommends that you do this for the safety of the employees. The important thing to tell the employees is when the remediation will begin and for how long, so that they know if they will have to make arrangements for the current situation. And if any employees begin to exhibit any health complications or symptoms brought on by exposure to mold, it is strongly recommended that they see their doctor before these symptoms worsen, and that they see an expert on medical effects of mold.
Once the infestation has been cleared out of the workplace, there is a test that must be passed in order for your employees to return. If the test is not passed, you will have to wait longer, but it’s not worth the safety of your employees to go cheap on these necessary precautions. Once the test has finally been passed, you can move your employees back into their respective work areas.
If you have chosen to simply ignore the mold infestation, you are liable for medical bills of your employees, and you could be in danger of losing your business. Of course, this can only happen if it is possible to proven that you knew of the infestation and chose to do nothing about it. However, it is definitely recommended to not ignore the infestation and shell out the cash to have it cleared out as soon as possible.
Atlantis , Belle Glade , and Boca Raton Florida Water and Flood Damage Restoration and
Riviera Beach , South Bay , and West Palm Beach Florida fire, flood and water Damage Restoration
Showing posts with label home improvement. Show all posts
Showing posts with label home improvement. Show all posts
Saturday, January 26, 2008
How To Repair Water Damaged Electronics
A lot of people have had their electronic devices come into contact with liquid, whether it’s a glass of milk or a bathtub full of water, but most people do not know what they are supposed to do with these items afterward. Can they be fixed? Is there really anything wrong with them?
Well, depending on how long they were in the water and whether they were on at the time, they can probably be fixed. It also depends on what kind of liquid you drop the device into. A lot of electronic devices switch of automatically as soon as they come into contact with a liquid and this is important, because it is not the liquid itself that causes the damage to the device. It is the electric current running through it when the water hits it. Even if you put a device that is not on in a puddle of clean water and let it stay in it overnight, it is not likely to be irreparably damaged as long as the power was off. You can most likely pull the item out of the water, allow it to dry completely, and it should power back on fine. I would not advise trying this as an experiment, though, because not every electronic device is made of the same material. As long as you do not attempt to power on the device while it is still wet, it should be alright. Allow the device to dry in a dry, cool area, but not so cool that it will let the device pick up any condensation.
Anything that has been submerged in dirty water, such as flood water, will probably require a bit more attention than that. Flood waters have been known to contain just about any kind of pollution that you can imagine. Silt, mud, sewage, and other chemicals could be getting inside your electronic device and it will take a lot more than simply drying the device out to get it to work properly again.
Even computer hard drives have been known to be restored with the proper cleaning procedures after having been flooded. The particle debris that has made its way inside the hard drive has to be cleaned out first and quite thoroughly before the drive will work again. Simply plugging the hard drive back into the computer after it is dry will NOT work and will damage the drive irreparably.
Unless you know a lot about electronics, your best bet is to take whatever water damaged device you have on your hands to a specialist. Depending on what the value of the device is or if it is a hard drive, the importance of the information stored on it, you might want to fork over the cash necessary to have it repaired.
Atlantis , Belle Glade , and Boca Raton Florida Water and Flood Damage Restoration and
Riviera Beach , South Bay , and West Palm Beach Florida fire, flood and water Damage Restoration
Well, depending on how long they were in the water and whether they were on at the time, they can probably be fixed. It also depends on what kind of liquid you drop the device into. A lot of electronic devices switch of automatically as soon as they come into contact with a liquid and this is important, because it is not the liquid itself that causes the damage to the device. It is the electric current running through it when the water hits it. Even if you put a device that is not on in a puddle of clean water and let it stay in it overnight, it is not likely to be irreparably damaged as long as the power was off. You can most likely pull the item out of the water, allow it to dry completely, and it should power back on fine. I would not advise trying this as an experiment, though, because not every electronic device is made of the same material. As long as you do not attempt to power on the device while it is still wet, it should be alright. Allow the device to dry in a dry, cool area, but not so cool that it will let the device pick up any condensation.
Anything that has been submerged in dirty water, such as flood water, will probably require a bit more attention than that. Flood waters have been known to contain just about any kind of pollution that you can imagine. Silt, mud, sewage, and other chemicals could be getting inside your electronic device and it will take a lot more than simply drying the device out to get it to work properly again.
Even computer hard drives have been known to be restored with the proper cleaning procedures after having been flooded. The particle debris that has made its way inside the hard drive has to be cleaned out first and quite thoroughly before the drive will work again. Simply plugging the hard drive back into the computer after it is dry will NOT work and will damage the drive irreparably.
Unless you know a lot about electronics, your best bet is to take whatever water damaged device you have on your hands to a specialist. Depending on what the value of the device is or if it is a hard drive, the importance of the information stored on it, you might want to fork over the cash necessary to have it repaired.
Atlantis , Belle Glade , and Boca Raton Florida Water and Flood Damage Restoration and
Riviera Beach , South Bay , and West Palm Beach Florida fire, flood and water Damage Restoration
Preventing Mold From Invading Your Home’s Construction
One of the worst things that can happen to someone who’s building a brand new home is discovering after the construction is completed that mold has been growing within his new haven. It is indeed a problem and it might be more common than you would think.
Mold can and does get built into new homes and a lot of the time, it’s the fault of the contractor for not properly inspecting or storing his building materials and by allowing the site to get wet from rain before the roof and walls are completed. Sometimes what is supposed to be the interior of the home is left uncovered and when it rains, the building materials get soaked and are allowed to dry this way. In warm, humid weather, this can allow mold to get a grip on the structure and begin to grow. You’ll not only have the possibility of mold, but you’ll also put your home at risk of water damage. Covering the building site with tarps or plastic sheeting should keep the rain, snow, (and the mold) out.
You should make sure that the contractor and his/her workers are using good quality materials to build your new home with. Testing the building materials for mold is one thing that you can do to make certain that it stays out of your home’s foundation. If you go to the building site and you see building materials like wood and sheetrock being stored directly on the ground, tell your contractor that they need to be raised up to aid in the prevention of mold growth. Your contractor should already know this, but irresponsible ones or those that are trying to make the process as easy as possible are the ones that you should worry about. Check your contractor’s references and make sure they’ve done a good job for others in the past.
The home should also be periodically checked for mold as it’s being built and after the building is completed. No one wants to go to the trouble of building a home that will be worth quite a lot of money if it’s only going to have to be gutted to remove mold a few months later, right?
If you’re careful and you keep an eye on your home’s construction, you can prevent most kinds of mold and water damage. If you’re not, you’re asking for quite a headache and the loss of a lot of funds.
Mold can and does get built into new homes and a lot of the time, it’s the fault of the contractor for not properly inspecting or storing his building materials and by allowing the site to get wet from rain before the roof and walls are completed. Sometimes what is supposed to be the interior of the home is left uncovered and when it rains, the building materials get soaked and are allowed to dry this way. In warm, humid weather, this can allow mold to get a grip on the structure and begin to grow. You’ll not only have the possibility of mold, but you’ll also put your home at risk of water damage. Covering the building site with tarps or plastic sheeting should keep the rain, snow, (and the mold) out.
You should make sure that the contractor and his/her workers are using good quality materials to build your new home with. Testing the building materials for mold is one thing that you can do to make certain that it stays out of your home’s foundation. If you go to the building site and you see building materials like wood and sheetrock being stored directly on the ground, tell your contractor that they need to be raised up to aid in the prevention of mold growth. Your contractor should already know this, but irresponsible ones or those that are trying to make the process as easy as possible are the ones that you should worry about. Check your contractor’s references and make sure they’ve done a good job for others in the past.
The home should also be periodically checked for mold as it’s being built and after the building is completed. No one wants to go to the trouble of building a home that will be worth quite a lot of money if it’s only going to have to be gutted to remove mold a few months later, right?
If you’re careful and you keep an eye on your home’s construction, you can prevent most kinds of mold and water damage. If you’re not, you’re asking for quite a headache and the loss of a lot of funds.
Subscribe to:
Posts (Atom)
