Preventing Water Damaging in Electronics

People would not get as bent out of shape about their cell phone getting wet if it wasn’t for the reason that they were probably using it at the time. Often is the case that electronics cease to function once they make contact with water because the device is powered on when it hits the liquid. If you are one of the unfortunate many who has dropped a electronic device in the drink, don’t worry about it. Just make sure that it wasn’t on when you dropped it in. While water can cause damage to electronics, the electricity that causes it to work is what causes the machine to fry like an egg on the windshield of your car in triple digit weather. Turning on your device after it has been submerged will cause the electric current to run through it and will usually render the device useless.

There are obvious ways to prevent your device from being submerged in water. One such way is called being careful. But this method isn’t always effective. If your device is, let’s say, a cell phone, a cover for it is your best bet. While a cover won’t always, well, cover it, it will be a great way to prevent a good deal of moisture. If, say, your computer has some water spilled on it (and just what are you doing with liquids around your computer, anyway?) you should IMMEDIATELY unplug it and wait for roughly two weeks so that it has dried out, and there is no water to cause its very unpleasant death. It is very important that you keep the device in a cool, dry area that won’t pick up condensation, because that will cause the device to take longer to dry, and additional water damage can be done. It is also important to wait for a week or two, and to make sure that you do NOT shake the device to see if there is still water in it. This can just cause damage to the device, and then you will have waited for probably nothing.

Now, if you are the kind of person who doubts their repertoire of electronics knowledge, it’s best to simply take the device to an electronics repairman. You will have to shell out a few bucks, but not as many as you paid for the device. This can also be taken as a chance to make sure there is nothing else wrong with the device that should be fixed before it is used again.


Atlantis , Belle Glade , and Boca Raton Florida Water and Flood Damage Restoration and
Riviera Beach , South Bay , and West Palm Beach Florida fire, flood and water Damage Restoration

Home Water Damage Causes

Despite the general knowledge that water damage is bad for any building, especially one’s home, it is not so well known just what all the possible causes for water damage are, or what factors can lead to it. The most common known causes of water damage are leaky plumbing, and leaking roofs, but there are mounds of other causes that are not as well known.

If you have a basement, and you have it insulated with fiberglass, it is easy for moisture to become trapped behind the walls, and air between one floor of the home and the basement floor can leak into them. It is because of this that insulating your home with fiberglass is not recommended, nor is installing plastic sheeting, as it is capable of trapping just as much moisture. A good idea for the insulation is using blue board, as it allows the moisture to move about the wall freely and makes the wall better able to dry off.

Problems, however, can arise if the land your home is on is sloped towards its foundation. If water is flowing towards the home, as opposed to away the home, it can seep into the basement and cause serious damage to the structure of your home, and can cause sink holes, which can cause your house to sink.

You should especially be careful to have your ceilings properly insulated in a cold climate, on account of the fact that they are not, water can leak into your house by way of what are called “ice dams”. In a warmer climate, flaws in air conditioning or air ducts can cause water damage by the formation of steam and humidity that likes to attach itself to things like roofing. And this build up can cause rotting on your roof as well as the infestation of mold, which can be harmful on one’s respiratory system as well as many other sicknesses that may result.

Improperly shielded attic hatches are another chief offender of water damage to one’s ceilings, as condensation is far more likely to gather in this manner. Lighting fixtures should be as tight as humanly possible when you install them, especially the recessed kind and exhaust fans are not directed outside from the house, it should be, whether they are in the bathroom, or places of this nature. Exhaust fans should have vents to the outside so moisture does not condense and cause avoidable water damage.



Atlantis , Belle Glade , and Boca Raton Florida Water and Flood Damage Restoration and
Riviera Beach , South Bay , and West Palm Beach Florida fire, flood and water Damage Restoration

How To Repair Water Damaged Electronics

A lot of people have had their electronic devices come into contact with liquid, whether it’s a glass of milk or a bathtub full of water, but most people do not know what they are supposed to do with these items afterward. Can they be fixed? Is there really anything wrong with them?

Well, depending on how long they were in the water and whether they were on at the time, they can probably be fixed. It also depends on what kind of liquid you drop the device into. A lot of electronic devices switch of automatically as soon as they come into contact with a liquid and this is important, because it is not the liquid itself that causes the damage to the device. It is the electric current running through it when the water hits it. Even if you put a device that is not on in a puddle of clean water and let it stay in it overnight, it is not likely to be irreparably damaged as long as the power was off. You can most likely pull the item out of the water, allow it to dry completely, and it should power back on fine. I would not advise trying this as an experiment, though, because not every electronic device is made of the same material. As long as you do not attempt to power on the device while it is still wet, it should be alright. Allow the device to dry in a dry, cool area, but not so cool that it will let the device pick up any condensation.

Anything that has been submerged in dirty water, such as flood water, will probably require a bit more attention than that. Flood waters have been known to contain just about any kind of pollution that you can imagine. Silt, mud, sewage, and other chemicals could be getting inside your electronic device and it will take a lot more than simply drying the device out to get it to work properly again.

Even computer hard drives have been known to be restored with the proper cleaning procedures after having been flooded. The particle debris that has made its way inside the hard drive has to be cleaned out first and quite thoroughly before the drive will work again. Simply plugging the hard drive back into the computer after it is dry will NOT work and will damage the drive irreparably.

Unless you know a lot about electronics, your best bet is to take whatever water damaged device you have on your hands to a specialist. Depending on what the value of the device is or if it is a hard drive, the importance of the information stored on it, you might want to fork over the cash necessary to have it repaired.



Atlantis , Belle Glade , and Boca Raton Florida Water and Flood Damage Restoration and
Riviera Beach , South Bay , and West Palm Beach Florida fire, flood and water Damage Restoration

Little known Phone Sticker Squeals On Water Damage And Voids Warranty

If you take a look inside the case of your cell phone, you should see a round white sticker placed somewhere on the device. What is it? This is called a water damage sticker and if your phone is exposed to moisture that makes its way inside the phone, this can be used to completely void your warranty, no matter the reason your phone may stop working. It does not seem to take much, either; a simple drop of water placed onto this sticker is enough to change its color and void the warranty on your cell phone. For honest consumers who accidentally get a small bit of water on their phone and then 5 or 6 months later, suddenly notice that the phone is having problems, knowing about this sticker is quite useful.

What exactly can you do to stop this little devil from voiding the warranty on your phone should is accidentally get a little damp? The best thing that you can do is to take a piece of satin finished scotch tape and put it over the sticker to keep the color from changing if it gets wet. If you drop your phone into the toilet or the bathtub, this probably isn’t going to be that effective, but if you are just worried about general moisture problems or an accidental quick spill of something on the phone, this should work just fine. If your phone stops working for some other reason, remove the tape and take it back to the manufacturer for repairs or a replacement.

It is was not exactly a bad idea for these stickers to be put on the inside of phones, though; a lot of phones get returned that are supposedly not water damaged, but are. At the same time, though, it is bad for the consumer because having such a sticker can completely void the warranty regardless of whether the liquid was the reason the phone stopped working or not. The phone could have just been a defective model and it would make no difference.

Hopefully people will use the information presented here honestly and not try to defraud the phone company into giving them a new item after their phone was irreparably damaged by having a hot cup of coffee spilled onto it or something like that. For honest consumers just having a bit of bad luck, it is great to know these kinds of things about our electronics just in case. Unfortunately, there are those that will attempt to misuse this information.


Atlantis , Belle Glade , and Boca Raton Florida Water and Flood Damage Restoration and
Riviera Beach , South Bay , and West Palm Beach Florida fire, flood and water Damage Restoration

Some Tips on How to Stop Water Damage

Everyone who owns or rents a home should know what to do to prevent water damage. Even if you rent the property that you’re on, it’s in your best interest to take some responsibility for your living space and do what you can do stop water damage, especially if you plan on renting there for a long time.

If you have a washing machine in your home or apartment, it’s a good idea to make sure that the hose doesn’t have any cracks in it. If the hose ruptures and begins to spew water, it won’t be long before your entire laundry room floor is covered in water and starts leaking into the next room. Hoses that connect to your washer should be replaced as many times and as frequently as you need to, but under normal conditions, every three to five years is sufficient.

A leaky water heater is also a cause of water damage in the home and one of the best ways to determine if you have a leaky one is to look for rust or signs that it has leaked in the past. If a water heater is located on a 2nd or higher floor of the home or apartment building, it needs to be installed inside a pan that has a drain connected to a drain in the floor to make sure the water goes into the plumbing system.

Making sure that water is escaping from your roof the way it should be one of the first things on your mind if you want to prevent water damage to your attic and the rest of your house. If you’re just renting an apartment, then this part is mostly up to your landlord or the property manager. If you’re renting a home, then part of this is probably up to you. Cleaning out the gutters and the general maintenance of the property is up to you unless it’s something serious. Making sure the downspouts that are attached to the corners of the house are free of leaves and other debris will drain water away from the foundation of the house and keep it from sinking into the ground. Keeping water draining away from the house and making sure the cracks around your doors and windows are thoroughly caulked and sealed is another step that you can take to keep water from leaking into your home.

What to Know When Hiring Your Contractor

The most important decision that you will make when you build your new home is which contractor you will choose for the job. A lot of people like to use the phone book for this job, but going a little deeper than that and putting a little more effort into choosing your contractor will end up saving you a lot of headaches and money.

Using the phone book to find the contractor you want is not entirely a bad idea. For someone moving to a new area, it is often one of the most feasible options. Having the ability to ask friends or neighbors about a good contractor is usually not available when you move to a new area, so you need to take some precautions when looking in the phone book for a contractor. Get at least three bids from three different contractors to build your property. Make sure they all get the same blueprints and look at the offers in comparison to each other. If one offer is significantly lower than the other two, this is usually a sign of desperation for work (not always a bad thing) and inexperience. Do a little research on the contractor that bid the lowest price and check up on his references. Giving someone who is well experienced and desperate for work is always a good idea, as long as you are sure that they are a good fit for you. Make sure you can live with this contractor being in your life for a few weeks or months. You need to have a good relationship.

As far as the contract that you will have, you should almost always go with a fixed price contract. This means that if there are unexpected costs that come up, the contractor will take care of them, not you. Building materials may change in price or the price of labor may go up and if you sign a time and materials contract, you will be responsible for making up for these new costs.

When writing up the contract, be specific. The date the project will begin and approximate date that it should be done needs to be in the contract. Make up a list of materials that you want to be used in the home. If you want 12 inch by 12 inch travertine tile, specify this. As with any important financial decision in your life, the devil is in the details.

Give your contractor an incentive to get the job done right and done early by offering a bonus if he does so. On the same token, do not be afraid to threaten a penalty if the project is done badly or finished late. All contractors should give you a warranty on their work that should be for at least 10 years.

Jim Corkern is a writer and promoter of quality
damage restoration companies and
mold removal companies across the united states.